search results matching tag: repair

» channel: learn

go advanced with your query
Search took 0.001 seconds

    Videos (218)     Sift Talk (13)     Blogs (25)     Comments (749)   

Deadlocked Bench Vice is Perfectly Restored

MilkmanDan says...

I wasn't thinking about including YT ad revenue in the economics, but I guess that certainly could be counted and definitely motivate many people.

However, I guess that confirms that it is passion for the work, the machines themselves, and the feedback that are the primary motivators for him. Would probably still be doing these repairs even if YT income / encouraging feedback wasn't a factor, and even without more traditional motivators like plans to resell or use the repaired devices.

I guess the closest parallel would be repairs and restorations for museum displays. There's a financial element there too, but the people doing the restorations do that job more for the love of the objects and seeing them restored.

eric3579 said:

(edited )

From what i can tell he does this because he's passionate about it and how getting feedback from his videos is what brings him the most joy (his reddit comment). I think it has very little to do with anything financial. Although the yt ad revenue for this video is easily into the thousands (1.6 million views). One of these a week, with those numbers, could easily make him a comfortable living.

Deadlocked Bench Vice is Perfectly Restored

MilkmanDan says...

I got interested in the economics of that refurb.

Looks like a new Gressel vice of roughly the same type can be bought for 550 Francs, which is just very slightly more than 550 US Dollars.

Nothing specific is said about time spent on the repair, other than getting off that one plate took "30 minutes of hammering", which is cut down to roughly 10 seconds of video. I figure that was a particularly time consuming caper to end up being the only thing shown where time spent was specifically mentioned. Some tiny bits of what we saw were roughly real-time, where all the work spent on a specific item was shown 1:1 in the video. But, lots of other stuff was probably somewhere between that 10 seconds : 30 minutes and 1:1 range.

I think a very conservative guess would be that each minute of video represented at least 30 minutes of work. So, 17 minute video x 30 = 510 minutes. Divided by 60 = 8.5 hours. As an extremely conservative estimate -- could easily be five or ten times that, particularly with lawyer-type "billable hours" consideration on what constitutes "work time".

But with that conservative estimate, he worked for (at the very least) 8.5 hours to repair something that could have been replaced for $550. Not including the new replacement smooth grips, etc. That's about $65 per hour. For extremely skilled labor.

I'm not mocking that at all -- I actually agree that it was quite satisfying to watch. But I think that just reaffirms that there must have been some real passion for the work there to decide to go through that very fiddly and skilled labor for what was likely much more than 8.5 hours rather than buying a new one and calling it a day. Not much of that kind of work ethic left these days -- and I sure as hell include myself in that!

Das Guillotine

Gapo says...

- Beta times 5V. And I will solve that to beta. Okay, it is...
*Board crashes*
- WOW! phew... Do we have that on video? Awesome! Oh shit!
- Wow... Okay, I will once again clean the blackboard and then we'll continue. Just look at it like that, that the blackboard will finally be repaired. That's awesome.
*Cleans Blackboard*
- Alright, everybody calmed down, myself not so much.
Somebody else: Did something happen to you?
- No, No... but it is... yeah. Just write for today: Our lecturer nearly got killed today. I'm just happy I went to the toilet before the lecture or I would have shit my pants.

ant said:

*education

English translation please!

Oroville Spillways Phase 2 Update October 10, 2018

Hypersonic Missile Nonproliferation

scheherazade says...

When you have neither speed nor maneuverability, it's your own durability that is in question, not the opponents durability.

It took the capture of the Akutan zero, its repair, and U.S. flight testing, to work out countermeasures to the zero.

The countermeasures were basically :
- One surprise diving attack and run away with momentum, or just don't fight them.
- Else bait your pursuer into a head-on pass with an ally (Thatch weave) (which, is still a bad position, only it's bad for everyone.)

Zero had 20mm cannons. The F4F had .50's. The F4F did not out gun the zero. 20mms only need a couple rounds to down a plane.

Durability became a factor later in the war, after the U.S. brought in better planes, like the F4U, F6F, Mustang, etc... while the zero stagnated in near-original form, and Japan could not make planes like the N1K in meaningful quanitties, or even provide quality fuel for planes like the Ki84 to use full power.

History is history. We screwed up at the start of WW2. Hubris/pride/confidence made us dismiss technologies that came around to bite us in the ass hard, and cost a lot of lives.




Best rockets since the 1960's? Because it had the biggest rocket?
What about reliability, consistency, dependability.
If I had to put my own life on the line and go to space, and I had a choice, I would pick a Russian rocket.

-scheherazade

Mordhaus said:

Also, the Japanese planes sacrificed durability for speed, maneuverability, and gun capability. Once US pilots realized this, they exploited the vulnerability because our planes were basically tanks compared to the Japanese ones.

The US had the best rocket program once the Saturn V became available in the 60s.

As of 2018, the Saturn V remains the tallest, heaviest, and most powerful (highest total impulse) rocket ever brought to operational status, and holds records for the heaviest payload launched and largest payload capacity to low Earth orbit (LEO) of 140,000 kg (310,000 lb), which included the third stage and unburned propellant needed to send the Apollo Command/Service Module and Lunar Module to the Moon.[5][6]

The largest production model of the Saturn family of rockets, the Saturn V was designed under the direction of Wernher von Braun and Arthur Rudolph at the Marshall Space Flight Center in Huntsville, Alabama, with Boeing, North American Aviation, Douglas Aircraft Company, and IBM as the lead contractors.

To date, the Saturn V remains the only launch vehicle to carry humans beyond low Earth orbit.

Apple under fire for allegations of controversial business

Mordhaus says...

They are extremely easy to repair and costs fuck all for parts. Apple jacks the cost of parts and is doing their best to force you to Apple Authorized repair locations that have to charge a pre-determined cost.

They want their equipment to be disposable, not repairable. They were doing it for years when I worked there and it's only gotten worse.

Of Course I'm Trying To Indoctrinate You In My Beliefs

shinyblurry says...

The establishment clause was put into the constitution because of the church of England. This is why many people fled from England to America, because of religious persecution. It was to prevent a state religion, and by religion we aren't talking about Christianity versus Islam, we are talking about different Christian denominations.

Look at what George Washington said in his inaugural address:

"Such being the impressions under which I have, in obedience to the public summons, repaired to the present station; it would be peculiarly improper to omit in this first official Act, my fervent supplications to that Almighty Being who rules over the Universe, who presides in the Councils of Nations, and whose providential aids can supply every human defect, that his benediction may consecrate to the liberties and happiness of the People of the United States, a Government instituted by themselves for these essential purposes: and may enable every instrument employed in its administration to execute with success, the functions allotted to his charge. In tendering this homage to the Great Author of every public and private good I assure myself that it expresses your sentiments not less than my own; nor those of my fellow-citizens at large, less than either. No People can be bound to acknowledge and adore the invisible hand, which conducts the Affairs of men more than the People of the United States. Every step, by which they have advanced to the character of an independent nation, seems to have been distinguished by some token of providential agency. And in the important revolution just accomplished in the system of their United Government, the tranquil deliberations and voluntary consent of so many distinct communities, from which the event has resulted, cannot be compared with the means by which most Governments have been established, without some return of pious gratitude along with an humble anticipation of the future blessings which the past seem to presage. These reflections, arising out of the present crisis, have forced themselves too strongly on my mind to be suppressed. You will join with me I trust in thinking, that there are none under the influence of which, the proceedings of a new and free Government can more auspiciously commence."

newtboy said:

Christian Right = Daesh for fake Christians (fans of, but not students of Jesus)

America was founded on the notion that religious laws have no place in public government or law and religious freedom is a basic tenant of our system. That makes what this idiot advocates about as unAmerican as could be.

This is part of why the right defunds education....history doesn't support their claims or plans, so they believe it shouldn't be taught.

Thanks for supporting us vs Apple

Can I have my rims back?

bcglorf says...

Mostly the trouble depends on where you work and how publicly you make your statement. I'd mostly get called a racist, but working for a partially publicly funded place if I was vocal enough losing your job or being told to apologise and be quiet are real possibilities.

The not allowed to talk about it applies much more heavily to anyone in the media. A recent example would be an aboriginal man that was recently shot by a white farmer. The narrative on the national CBC media made a big deal about rampant racism in the region against aboriginals. In their coverage of local opinion it was even more one sided, as they described two sides, the grieving family of the deceased and their supporters, and then the racists who sided with the farmer because they hated aboriginal people. They very slowly, reluctantly and buried deep under a lot of disclaimers released more information on the case.

The young man that was killed was in a truck with 4 of his friends, and their story was that they got a flat tire and pulled into the yard to seek help with repairs. The CBC ran that much right away. They were much more reluctant to include that the RCMP had been called BEFORE the truck got onto that farm because they had been trying to steal a truck from a neighbouring farm already beforehand. It wasn't until during the trial that even more came out, and CBC again reluctantly included details from the friends that where with the victim. All the occupants of the vehicle had been drinking very heavily all afternoon. They admitted to 'checking cars' at the earlier neighbouring farm. They admitted to using the butt end of a rifle to try and break the windows of the truck at the neighbouring farm, but the stock broke off the gun. It was found at the neighbouring farm by police. Upon arriving at the final farm, they admitted trying to start up an ATV and going through and unlocked vehicle there as well, but disagreed on who was doing which. The trial even included text messages from the night before wondering if one of the friends would be able to "go on missions" tomorrow because they were hiding from police after a liquor store robbery. The farmer also mentioned being scared about what could happen the day of the shooting because he thought back to a story he'd been told about 2 farmers being killed on their yards a few years before he'd moved into the area. Only 1 media outlet in the country, and in 1 article checked out that the identity of one of those killers back then turned out to be the victims uncle. I had to go back looking for the original article from when those murders took place to be sure that the current news article wasn't just sensationalising things.

Now of course none of that means you want to see somebody getting killed over property theft. None of that means racism in any way shape or form is justified. However, when there was a rampant run of rural crime across the area and farmers were getting more and more fed up and nervous about their safety something bad was eventually going to happen. It's a tragedy, but our media was absolutely terrified of covering the full story because listing the facts I just laid out is considered racist. Your blaming the victim. My listing of the above facts is not supposed to be done without including many times more explanations and reasons that this was the white man's fault.

Ultimately, the absolute failure to talk openly about things in Canada is getting people killed. We absolutely need to be clear that stealing doesn't deserve a death penalty. We ALSO need to tell a group of young adults that were going farm to farm, with a loaded rifle, raging drunk, stealing and breaking into vehicles that doing that was a BAD idea and one of the reasons is that doing so might get you shot by someone that doesn't know if your going to hurt them or not. I really believe if the kids had been white that would have been the narrative, but because of race it wasn't. It just makes things worse and inspires more risky and dangerous decisions from people in the future and more people will continue to get hurt.

Fairbs said:

when you talk about getting in trouble, do you mean being called a racist and if not what kind of trouble?

I find it interesting that in the states, people often use an over represented prison population (relative to % of normal population) to indicate that 'those' people are bad. I think with yours and Drachen Jagers comments, you are actually coming from a place that is trying to find a solution to the discrepancy and looking at the underlying conditions that got people into where they are. I wish more people were like that. I also appreciate the insight into the Aboriginal population in Canada. It sounds pretty similar to what's going on in the States.

Oroville Spillways Phase 2 Update Mid-June 2018

oritteropo says...

To add to @eric3579's comment, the work was fairly carefully planned to occur over Summer, and after the water level had been reduced, to minimise the chances that they would get caught out like that. The hydro plant should be able to release more water than required for the duration of the second phase of works.

Their first phase was designed to leave the main spillway usable over winter, so this second phase could commence afterwards. The emergency spillway was designed never to be used, it was more like a fuse to allow evacuation if the dam fails. The revised design, taking into account the fact that the emergency spillway was required, appears to have strengthened it enough to be used as a backup instead.

The repairs would have been a heck of a lot cheaper if they had been conducted a decade ago, although I do wonder if all the flaws would have been obvious at the time.

RFlagg said:

So what if they need to use either spillway before they finish this project? It looks like even the main spillway is a long ways from being complete. While the emergency spillway can probably hold off except for another emergency of course...

I'd imagine if I lived downstream I'd be thinking, a little too late on these repairs, given they were requested a decade ago.

Oroville Spillways Phase 2 Update Mid-June 2018

RFlagg says...

So what if they need to use either spillway before they finish this project? It looks like even the main spillway is a long ways from being complete. While the emergency spillway can probably hold off except for another emergency of course...

I'd imagine if I lived downstream I'd be thinking, a little too late on these repairs, given they were requested a decade ago.

Happy 16th Birthday

newtboy says...

Funny, that's exactly how my parents felt when I asked them for a car.....
....but they helped my older brother get his hardship license at 14 in Texas, bought him a pickup truck, and replaced it with a new Toyota Supra when he turned 16. I don't think he even paid for gas until he was over 18.
I bought my own 8 year old Pontiac Lemons and paid for my own insurance and gas (and repaired it myself, no money left for mechanics), and got my license with no help at all when I turned 16....and I feel excessively lucky I was fortunate enough to be able to do it.

ChaosEngine said:

I also feel obligated to point out that 16-year-olds should be given any kind of car for their birthday, let alone a new one.

I bought my first car in my 20s and it was nearly 10 years old. Paid for it myself too.

This guy is not living up to his national stereotype (Scots are tight-fisted with money) and should be ashamed.

My lawn; you're standing on it.

How iFixit Became the World's Best iPhone Teardown Team

ChaosEngine says...

“The most important thing that happens when a new iPhone comes out is not the release of the phone, but the disassembly of it.”

Demonstrably false. The market has proven that almost no one cares about this.

When the iPhone first came out, people derided it’s lack of removable battery. Good luck finding a high end smartphone with a removable battery these days. Then there was components soldered onto the board, then the removal of the headphone socket, all of which Samsung, etc have copied*.

Outside of a vocal minority, no one cares about phone repairability. If you do, congrats, you’re part of that minority, and that’s fine. Personally, I think it’s a reasonable thing, but clearly, most people prefer thinner, lighter, water resistant phones over fixable phones.

* note: yes, Apple have copied features of droid phones too. No, it’s not relevant to this discussion.

The Pinball Doctors: The Last Arcade Technicians in NYC

newtboy says...

I sold my black knight a few years back.
The guy who bought it played it non stop for weeks, then it died.
The only repair shop in our area no longer services pinballs at all, so just to have it inspected he's going to have to go all the way to Portland or the Bay Area, 3-400 miles. It's been sitting dead in his living room ever since. It sucks. I hope there's a resurgence and they start working on them up here again.

lurgee (Member Profile)



Send this Article to a Friend



Separate multiple emails with a comma (,); limit 5 recipients






Your email has been sent successfully!

Manage this Video in Your Playlists

Beggar's Canyon