>> ^EMPIRE:

Here in Portugal the law is similar to german. You obviously can install a video surveillance system, but you need to fill out a form informing the data protection agency, telling exactly what can be seen through the camera(s). Otherwise, that footage will never be accepted in a court of law as evidence.


Another fun fact in law differences just by the way: evidence illegaly obtained can sabotage a case in the US (at least has to be disregarded) whereas it makes no difference in Germany. Police unlawfully searches your home and find drugs? You will be prosecuted (but the copper also will).

Yea there is also a similar method



you may hear cops refer to it as the "Shake and Bake" method

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
644;▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
;▬▬▬▬▬
Materials : 1 box of pseudo-ephedrine pills, 1 Cold-Compress pack, a bottle of lye crystals, 2 AA energizer lithium batteries, Coleman fuel, Iodized salt, sulfuric acid or Muriatic acid, 2 20oz bottles, coffee filters, a clear hose about 6 - 12" long, funnel, 2 Pint Mason jars, and lineman pliers.

first off, make sure your working in a clean and safe area. Clean both of the 20oz bottles with some paper towels and a clothes hanger, rinse with Coleman fuel, and repeat. You want the bottles to be clean as possible to make clean dope.

After you clean one bottle, use your funnel and one coffee filter and put 8 oz of Coleman fuel in the bottle. Then, using your lineman pliers, obtain the lithium metal from the batteries, tear them small balls and put them in your fuel. After you get both your lithium strips in, add 3 tablespoons of crushed Ammonia nitrate from the cold compress pack, and 3 tablespoons of lye crystals. Shake the bottle and get a reaction going. After you get a good reaction add your crushed pseudo-ephedrine and let it cook for 45 minutes to an hour. Burping the bottle when it get tight. refrain from shaking the bottle in the during the last 15 minutes of the cook.

Their should be a good amount of copper "b.b.s" floating with your lithium strips. this is a good sign your cook is close to finished. Clean out the mason jar you have ready, and use 3-4 filters to filter off your cook into the mason jar.

Now its time to make a smoke bottle, either using sulfuric acid or Muriatic acid. Clean the 20oz bottle like before, and make a hole in the cap big enough for your hose. if your using sulfuric acid, add 1 tablespoon of salt to the bottle and just a couple drops of sulfuric acid. If your using Muriatic acid, put 3-4 balls of aluminum foil in the bottle and a couple drops of Muriatic acid. Put the hose right above your fuel in the mason jar and watch the dope drop.

Hit it with the smoke a couple times and stir it up until it doesn't drop anymore, then filter this into another mason jar, and you got your first pull in the filter. dry it out and test it. then take the fuel you poured off and put it back in the cook bottle. cook it for about 30 minutes and try for a second pull.

You should yield about a gram, to a gram and a half of Methamphetamine.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
644;▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
;▬▬▬▬▬▬



That's the shake and bake for easy meth in a bottle, you can make it in an old soda bottle.

>> ^xxovercastxx:

@BoneRemake
Please clarify why this is not EIA because it seems to fit the channel description perfectly to me. Nothing says EIA has to be funny.

This channel is home to videos of people who seem to have a great desire to remove themselves from the gene pool or at least cause great bodily harm to themselves as they slowly work their way out of the gene pool.

When I asked lucky760 to update the description because of confusion between a couple members, I was told along the line, EIA is for people willfully taking themselves out of the gene pool by doing something stupid like balancing on a galvanized nail while on top of a copper lined roof while on top of a buffalo. I was not told the channel is around for people who "take themselves out of the gene pool " by misinformation/religious indoctrination,lies of sorts, or just being too stupid for your own good ( like my sister). I do hope it is clearer as to where I am coming from. More or less the EIA channel is for people being stupid doing stupid things, that 99/100 people would consider a bad idea. Does not include car accidents, people getting hurt by things they can not control etc.

Thank you for your time and continued support.

Lets do lunch !


Get some clarification on the channel for yourself though if this does not suffice.

subsidizing big business friends that don't need the subsidy or tax break may be the place to look for that

Places like Illinois, California, Wisconsin, and New Jersey are not facing fiscal black-holes because they are paying too much in subsidies to ‘big business friends’. The main problem is that they have promised government workers a gold-plated lifestyle when they only had a copper-plated budget. You could end every ‘big business’ tax break, subsidy, and kickback tomorrow and it would not even make a dent in the budget shortfalls of states like Illinois. The problem is government over-spending. Here it is in black and white. This isn’t ‘left or right’. This isn’t ‘liberal or conservative’. This is just the brutal, harsh, cold reality…

http://sunshinereview.org/index.php/Illinois_state_budget#Public_Employees

You will notice that Illinois’ budget is NOT dominated by a big line item of ‘subsidies to big business’. The budget is dominated by government spending on unions, union benefits, and entitlements. The only way to ‘fix’ such a budget is to cut the spending. Really. Because for every 12 people living in Illinois, there is one full-time salaried government worker pulling a higher wage, more benefits, and a better retirement than the people paying for him. Such a system is economically impossible to support. And there is plenty of evidence that such systems will ALWAYS collapse because of ineffiency. Greece, Italy, Portugal – entire nations are collapsing because of exactly the same problem. And that problem is the poison of Keynesian economics propping up an impossibly lavish public sector.

That's basically my point, this country has plenty of money, it just does it's that people are greedy as **** so they're going to say that only THIS slice of the pie is available for you guys

You are talking as if the public sector is NOT getting its ‘piece of the pie’…

http://www.dispatch.com/content/stories/local/2011/09/14/study-finds-public-employee-compensation-better-than-private-sector.html

http://www.aei.org/docLib/AEI-Working-Paper-on-Federal-Pay-May-2011.pdf

It's just not true, public service unions have nothing to do with the crisis, when you look at the fact that we're in two Wars and spend double what the entire world spends on the armed forces

To say public unions have 'nothing' to do with the economic shortfalls is just factually incorrect. The links above prove it. Illinois has entire sections of its budget dominated by union issues, and union contracts repeatedly block any attempts at reform.

But regardless... Sure. Cut federal defense spending. And while we are at it, we should also cut Medicare, Medicaid, Social Security, and every other program. Cut them all. Slash them by 33% across the board. No exceptions. No mercy. But anyone that thinks that the only place we need to cut is ‘defense’ and that’ll fix it all it living in a dream world.

For example – how is cutting defense spending going to help Illinois? Or California? Or New Jersey? Or let’s take it national. Greece’s defense spending was a measley 3.4%. Explain how they would solve their massive budget shortfall by cutting defense. Or the US… Even if you cut US defense spending to zero, our current deficit is over 1.4 trillion. Defense to zero? 700 billion. Only HALF of just the deficit. It doesn’t even touch the 14 trillion in debt the nation already has. Or the further SEVENTY trillion in debt we have to cover all the 'unfunded liabilites' of Social Security, Medicare, and Medicaid.

At some point all the prog-libs out there are going to have to accept the facts. You can’t close the massive budget shortfalls that cities, states, and nations have with defense cuts. The problem is not defense. It is not ‘big business’. The problem is that governments are overspending on unsustainable public employee packages and entitlements that have no reasonable expecation of ever being paid for.

Your video, Extra slowly falling neodymium magnet in a copper tube, has made it into the Top 15 New Videos listing. Congratulations on your achievement. For your contribution you have been awarded 1 Power Point.

No more wire hangers!!!!!!
>> ^budzos:

Also, that is not much of a pipe... it's a thin copper pipe and you can see it bending as he hits them.

Also, that is not much of a pipe... it's a thin copper pipe and you can see it bending as he hits them. Not that it relates to the rest of my discussion here... just sayin' reminds of in seventh grade when this weird kid challenged my friend to a fight after school. The kid showed up with a curtain rod, which at the start of the fight he raised above his head and slammed into the ground, and it went PLONK and bent like a drinking straw.

Copper isn't all that reactive actually, it has similar properties to gold and silver. The similarity there is due to having a single electron in the "outer shell". That single electron is also why it does some interesting stuff.

http://en.wikipedia.org/wiki/Reactivity_series

Does the wire have to be in a coil formation for this to work? Or are they just getting more surface area for the demonstration?


What is it about copper that reacts chemically to other substances?

I wish I'd taken chemistry in school.

>> ^fissionchips:

It's a little complicated, because aluminum is also a good conductor (ie. low electrical resistance). To keep the coil from overheating, these induction forge rigs have water hoses that circulate cold water through the copper coil. >> ^Ornthoron:
>> ^mxxcon:
how did those copper tubes didn't melt?

Copper is a better conductor than aluminium.

water and electricity?

It's a little complicated, because aluminum is also a good conductor (ie. low electrical resistance). To keep the coil from overheating, these induction forge rigs have water hoses that circulate cold water through the copper coil. >> ^Ornthoron:

>> ^mxxcon:
how did those copper tubes didn't melt?

Copper is a better conductor than aluminium.

>> ^mxxcon:

how did those copper tubes didn't melt?

Copper is a better conductor than aluminium.

how did those copper tubes didn't melt?

Tags for this video have been changed from 'silver nitrate, copper coil, copper, silver, ion, crystal' to 'silver nitrate, copper coil, copper, silver, ion, crystal, chemistry, chemical reaction' - edited by calvados

They're great, aren't they? I love reading them. Every four months or go I'll go back through them all fresh when I need a good read about things that react violently and burn with vigor. Glad I could help!

In reply to this comment by oritteropo:
I know your comment wasn't aimed at me, but I've read some of them... I've learned not to read them at work, it's hard to pretend you're working while laughing that much.

Note that most of the fume hoods mentioned on that site probably would be bulletproof.
In reply to this comment by NicoleBee:
[...]Ever read http://pipeline.corante.com/archives/things_i_wont_work_with/ ?