The whole world is falling apart!

Seams?

Every single one of our institutions is falling apart at the seams.

Well to a point a agree.
However knowingly providing a product that can / will cause 3rd degree burns warrants special understanding of product continent and delivery.

A Styrofoam cup with a cheesy fitting lit seams a bit lacking.

A stronger containment system to prevent the lid from easily coming off seems like a step in the right direction.

If I was in a lab had had to transport some acid would I use a cheep container that would allow a possible accident if dropped or tipped over or would I desire to solid container / lid system?

I get it it's just coffee and we handle it every day and are aware of its danger. But we don't handle 190 degree coffee every day. Only and McDonalds

Uh oh. The MSM is getting to him. He's breaking at the seams.

Grinding the streets first inch or two off. When they stop it's probably because of a man hole, storm drain or something they are trying to not damage and have to go around or do the hand work around it.

Street looks dark right after they grind because the asphalt underneath has sections that aren't bleached from the sun and what not.

Then they smooth it to pick up the bits left, the street gets white looking because of all the scratching to the layer they leave, or because there is concrete underneath. They do bridges like this...two or more layers of asphalt to take all the wear and tear and water damage. Then replace it every so often so the concrete lasts longer.

Curb sides take the longest because they don't want to break the sidewalks, and the machines can only get so close without putting too much pressure on them.

Then they spray tar down to help the new layer of asphalt stick to the existing and help seal out water. If they don't spray tar down on old surfaces, asphalt tends to stick to itself and will hump up and become uneven when the guys roll it to compact it and smooth it out. You still have to slow gradually to stop this from happening. It's why when you drive down the road on a new street and you feel little bumps, often times you can't even see them. But it's because the rollers are stopping and the asphalt is developing little humps where they are pushing the material ahead of them as they compact like a little wave. And if they don't seal out the water well, if it ever gets between the layers and freezes, the top layer will just buck up and crumble...and you have a pot hole. Why they are along the edges the most, because the water gets in between the sidewalk and asphalt and runs underneath the new layer. Or sometimes it can get between the seams of the new asphalt, where one strip meets another if they don't match them well.

Parking lots, and country roads would let this crew do many more times repavement than a street like this. Because of the sidewalks, man holes, constricted lane of movement, and having to maintain the height of the road to maintain the flow of water.

Country road they'd just put another layer of asphalt down and then put approaches (basically a gradual ramp) on the other roads and driveways so cars can get onto it. No grinding, no sidewalks and stuff to worry about. Or if the road is really bad. They'd put one layer to fill in all the holes, then another on top of that.

Comment hidden because you are ignoring dag. (show it anyway)

Great quote from Jim on the brouhaha: "I'll just say this: in my opinion Fux News is a last resort for kinda-sorta-almost-journalists whose options have been severely limited by their extreme and intolerant views; a media colostomy bag that has begun to burst at the seams and should be emptied before it becomes a public health issue."

Read more: http://www.upi.com/Top_News/US/2013/03/29/Jim-Carrey-blasts-Fox-News-over-Cold-Dead-Hand-criticism/UPI-74931364591982/#ixzz2OylvdlrH

Straight lines that cut through the scene
like you wanted to, blue jeans.
Soft loans that spent all last summer
buying drinks for you, blue jeans.
Left hand that crashed near your house
in the ice and snow, blue jeans.
A face outside sleeping pressed against
the bay window, blue jeans.

You've been trying to protect me,
An insect living in your memory,
Don't, blue jeans won't cut at the seams,
Like you want them to.

You WON'T need me to show the way now
they're onto you, blue jeans.
And I won't be phoning you today
unless you want me to, blue jeans.

You've been trying to protect me,
An insect living in your memory,
Don't, blue jeans won't cut at the seams,
Like you want them to.

She's had martial training, you can tell from her form-She twirls the long staff well enough, has a well-oiled sense of her center, quite grounded-BUT, if she wants to be a Ninja she's needs to be able to scale vertical obstacles with only the texture of the stone and the mortar seams to hold on to.

the last 3 comments....Remember Bruce Lee? He was taught by the best (IpMan-Wing Chun styles) and his version of martial arts was an amalgam of several styles. He called it Jeet Kune Do and the Chinese purists were saying the same thing about his hybridized, eclectic form.

Y'all remember Bruce Lee right?

This chick would throttle most posers.

@GeeSussFreeK

I tried to stay way from issues specific to the use of nuclear technology for a reason. There's very little in your reply that I can respond to, simply for a lack of expertise. So bear with me if I once again attempt to generalize and abstract some points. And I'll try to keep it shorter this time.

You mentioned how construction times and costs are pushed up by the constant evolution of compliance codes. A problem not exclusive to the construction of power plants, but maybe more pronounced in these cases. No matter.

What buggers me, however, is what you can currently observe in real time at the EPR construction sites in Olkiluoto and Flamanville.
For instance, the former is reported to have more than 4000 workers from over 60 nations, involving more than 1500 sub-contractors. It's basically the Tower of Babylon, and the quality of work might be similar as well. Workers say, they were ordered to just pour concrete over inadequate weld seams to get things done in time, just to name an example. They are three years over plan as of now, and it'll be at least 2-3 more before completion.
And Flamanville... here's some of what the French Nuclear Safety Authority had to say about the construction site: "concrete supports look like Swiss cheese", "walls with gaping holes", "brittle spots without a trace of cement".

Again, this is not exclusive to the construction of NPPs. Almost every large scale construction site in Europe these days looks like this, except for whatever the Swiss are doing: kudos to them, wonderful work indeed. But if they mess up the construction of a train station, they don't run a risk of ruining the ground water and irradiating what little living space we have in Europe as it is.

Then you explain the advantages of small scale, modular reactors. Again, no argument from my side on the feasability of this, I have to take your word on it. But looking at how the Russians dispose of their old nuclear reactors (bottom of the Barents Sea) and how Germany disposes of its nuclear waste (dropped down a hole), I don't fancy the idea of having even more reactors around.

As for prices, I have to raise my hands in surrender once again. Not my area of expertise, my knowledge is limited to whatever analysis hits the mainstream press every now and then. Here's my take on it, regarding just the German market: the development, construction, tax exemption, insurance exemption, fuel transport and waste disposal of the nuclear industry was paid for primarly by taxes. Conservative government estimates were in the neighbourhood of €300B since the sixties, in addition to the costs of waste disposal and plant deconstruction that the companies can't pay for. And that's if nothing happens to any of the plants, no flood, no fire, nothing.

That's not cheap. E.ON and RWE dropped out of the bid on construction permits for new NPPs in GB, simply because it's not profitable. RWE CEO Terium mentioned ~100€/MWh as the minimum base price to make new NPPs profitable, 75.80€/MWh for gas-powered plants. Right now, the base (peak) price is at 46€/MWh (54€/MWh) in Germany. France generates ~75% of its power through NPPs, while Germany is getting plastered with highly subsidized wind turbines and solar panels, yet the market price for energy is lower in Germany.

Yes, the conditions are vastly different in the US, and yes, the next generation of NPPs might be significantly cheaper and safer to construct and run. I'm all for research in these areas. But on the field of commercial energy generation, nuclear energy just doesn't seem to cut it right now.

So let's hop over to safety/dangers. Again, priorities might differ significantly and I can only argue from a central European perspective. As cold-hearted as it may sound, the number of direct casualties is not the issue. Toxicity and radiation is, as far as I'm concerned. All our NPPs are built on rivers and the entire country is rather densely populated. A crashing plane might kill 500 people, but there will be no long term damage, particularly not to the water table. The picture of an experimental waste storage site is disturbing enough as it is, and it wasn't even "by accident" that some of these chambers are now flooded by ground water.

Apologies if I ripped anything out of context. I tried to avoid the technicalities as best as I could in a desperate attempt not to make a fool of myself. Again.

And sorry for not linking any sources in many cases. Most of it was taken from German/Swiss/Austrian/French articles.

Your video, Huge amounts of Coal Seam Gas bubbling in Australian River, has made it into the Top 15 New Videos listing. Congratulations on your achievement. For your contribution you have been awarded 1 Power Point.

Comment hidden because you are ignoring dag. (show it anyway)

Pretty sure that coal seam gas has been extracted in Australia for a while now.

I was hoping she'd rip the skirt seam and really give it some.

Some poor research assistant is going to be running tests at the LHC looking for extra dimensions when suddenly a resonance cascade will rip dimensional seams, devastating the facility. Aliens from another dimension known as Xen will enter the facility through these dimensional seams. A funny talking guy dressed in a suit and brief case will start appearing at random as you battle your way out of the facility! You will soon discover the secretly developed gravity gun and use it to solve puzzles with your new friend, Facility Policeman Barney! Portals of orange and blue will bend the laws of physics! A plague will take the world by surprise, turning everyone into rabid zombies!

oh wait, that's just Valve.

Biker owner said it himself. "Try to think of a plan and not be emotional about it" He fell victim to his own emotions when he let the cat out of the bag. Seams reasonable when you have your adrenaline pumping; normal human nature in action. Not unless he is a pro at confronting thieves could he possibly keep his cool and composure.

That is badass and looks good, too. If you can't do what he does then you could pull the same thing off for cheap with a roll of good quality veneer. Yeah, it will have a seam but ok.