Fast. The US is highly militarized. And its military/police are much better funded than in Mexico.

"a mob of random untrained angry armed strangers"

If they are my friends and neighbors, I would not call them a mob (I don't know how you view your friends but I don't see my friends like this) and I would trust them more than the police. So did the American Revolutionaries. They trusted their fellow colonists more than the "well regulated and trained" British Army. But even then, many trusted the establishment, the Red Coats.

And who are you even talking about? Because, to each other, they are not "random strangers." The police are the "random strangers!" For most people, anyway.

This scene comes to mind.
Like Corleone implies, it's good to know where your loyalties lie. And that of those who engage with you.

"I will trust the police. EVERY. SINGLE. TIME. (and make no mistake, I don't trust the police much at all) That's just me."

Yep, that's just you, and some others, for sure. So what?

"I don't know about you"

Now you know.

And like I said: Good luck with that. I wish you the best and that you never have to 'rely' on the police to 'protect' you.

Really could have done without the cheesy quasi trench-coat dude. They're just feeding the stereotype that people who are concerned about government spying are a bunch of paranoid schizophrenics.

i cannot express just how much this fake scandal tickles me.
my feeds have been blasted and coated for weeks since this all started with "i support phil" and "phil is a hero of the first amendment".

a fake controversy about a show i dont watch.
on a network i dont frequent.
based on words from an ignorant hillbilly.

but even at the outset of all this it had the flavor of fabrication,a planned and calculated cacophony of incendiary bullshit.

a product was being marketed.

and will ya lookie here.....
thats exactly what it was.

phil roberston was no salt-of-the earth,hard working hillbilly redneck whose family made it big in the duck calling business.

he is a savvy businessmen who plays a scripted role in a scripted "reality" show that appeals to a certain demographic.
he is an actor.
a product created to entertain the masses.
a created character where many of his loyal fans can relate because he looks just like them.
talks like them.
acts like them.

kinda like sarah palin but with a ZZtop beard.

the conservative christians have been duped.bamboozeled.
even this controversy has been a marketing creation in order to sell more T-shirts and posters.

and it has worked brilliantly.

Why is it that this guy gets hung by his toes. But when Alec Baldwin calls someone a "fucking cocksucking faggot" and a long list of other unrelated homophobic slurs, no one bats an eye.

All reality TV shows have been doctored to make for more interesting TV since its inception with The Real World, the so-called point of this whole video is mute. Anyone with half a brain cell knows this video isn't about Duck Dynasty being fake, or about the discrimination of opressed people.

Alec Baldwin is making millions doing far worse on a monthly basis. Remember when he called his 12 year old daughter and verbal and mentally abused her? Or when he called a reporter a fat queen. Or another incident where he threathens to shove his foot up someone's faggot ass. No one tries to ruin his career over any of the horrible disgusting things Alec has said or done, but this bearded redneck happens to quote bible scriptures. That's what all this fabricated hate is really all about.

Most of the 'outraged' people don't give a shit about gay people, they just want to see the religious wingnuts get taken down a peg so they can wave their fedora emblazoned atheism flag. They won't come right out and say it because it would make them selfish assholes riding the coat-tails of people who are actually being abused and discriminated against. No I'm not religious, but I can smell bullshit a mile away, and this whole thing reeks. Were's this assholes outrage when it comes to Alec? Ohh He dosen't really give a shit about gay rights, not a peep when he can't pin a christian to the wall; he just cares about religious people doing stupid things.

Don't subjegate the real issue with your atheism agenda, it makes you look disgusting and reprehensible. That attitude is exactly why no one takes our ideology seriously; You think your doing some greater good, but your means are selfish to the very core.

It almost looks like he's the one that pushes the baby over the edge when he's swinging his coat around. @ about 13 seconds

People are starving in Greece, fascists are marching in the streets of Athens.

And given that SNAP participation went from ~26 million in January of '07 to ~39 million in January of '10 to ~47 million in January of '13, I'd say the US is getting there as well. The planned cuts to SNAP will only accelerate it further.

But everything's good in the UK though. People are not likely to starve, now that food banks are popping up everywhere and the Red Cross is distributing care packages for the first time since the end of WW2.

Besides, those likely to starve will freeze first anyway. They had ~31k of excess winter deaths last year, while this year's prognosis was going for ~35k, last I heard. Food or fuel, can't have both.

Those riots in London two years ago, they were a singular occurence. All the underlying issues have been addressed. Youth unemployment is #1 on David Cameron's list, I'm sure of it. Well, maybe #2. Privatisation of the NHS has priority after all.

I apologize for my sarcasm and my cynicism, but mass violence is not unimaginable anymore in the Old World and it's pissing me off. We are in the process of flushing an entire generation of people down the toilet. These current rates of youth unemployment are unsustainable in a democratic society. The banlieus of Paris, the boroughs of London... shit will hit the fan eventually, unless there's a radical change of policy from within the system.

The elections to the European Parliament in May next year will be an indicator. As of now, it looks as if a whole lot of (far) right wing parties will enter the stage.

Also, keep an eye on the island of bliss(ful ignorance) within Europe: Germany. We're heading straight for a grand coalition that would control ~80% of parliament, rendering all instruments at the opposition's disposal inert. Did I mention they also have the neccessary 2/3 majority to institute changes to our constitution? Fucking awesome!

Again, sorry for being a grumpy fuck, but everytime I open the paper, it's a bloody nightmare -- and that's before you take away the sugar coating.

Jesus Christ and the gun-bashing bandwagon is leaving the station. My ramblings lost in the ether regardless of facts or fucking figures (death stats by firearms or violence), become mute when you consider that more Germans die of complications from their annual Bratwurst intake than from violent crimes. MY POINT was to pooh-pooh quadrophonic who turned the thread in the direction it went with a simple comment.

Then comes the bandwagon, which I attempted to derail, and now everyone wants to jump in and whine about their take on issues surrounding firearms in the United States, like they are some fucking problem. The problems' with criminals being created by a broken criminal justice system, the fear mongering fomented by news organizations and the cunts proposing legislation whenever some imbecile snaps, and the lackeys that feed on their output like pablum.

All stats, all anger directed at senseless crimes committed by the uncommitted with guns (mass shootings), and all dumb assess who feed on news organization's and their editorializing on sensible laws for guns (that we don't already have) in order to justify more laws become IRRELEVANT when you consider, that by design disarming partially or completely the average citizen is the goal of any fascist.

Most of you who UP-voted ASMO's comment without this explained context or with it, are pretty much the lay-down-and-fuck-me types who, should some fascist regime pop-in and tell them what and how to do things now, would enthusiastically succumb, especially if the offer were candy-coated and the statistics looked good, and you could keep things like groceries and your fucking car.
(and yeah, I up'ed quad's comment...I love to jump head-first into threads hi-jacked by passionate fools)

Or, you simply live in another paradigm (being in a country who has not systematically programmed their inhabitants with violence, fear, and race-tensions) and have no reference for the consternation of a sane, reasonable person surrounded by minions of dutiful robots.

It's pretty easy to be negative about this - but I'm sure every single one of you nay sayers have experience that moment when you cleaned up real nice and thought to yourself "Daaaamn. That's me"

Now multiply that by a thousand. That's what that dude must have felt. I bet he saw himself in that suit, with that cut and trim and thought "Holy shit. This is me." I bet he saw himself in a new light and felt absolutely awesome, if only for a little while.

Sure, it's not a quick solution. Sure, it's a coat of paint. But it could be a great start.

I say bravo to these guys. Even if it doesn't pan out, they gave that guy a wonderful wave of emotion.

Oh that will keep the demons out of his head...

His appearance stems from his experiences. He looks like he needs some real help, not just a new coat of paint.

"Kids! The car is brown today; grab your coats!"

Pretty uber-funky, eh? The craze with this stuff all over the web is coating yer dink-plastic parts, rims, motorcycle fairings and what-not, and (ugggh), rifle stocks or pistol frames....I was looking for a, "coating body parts" idea with it on YT, found a guy dippin' his arm and these....dipping skulls. Kinna cool.

Saw this on Junkee:

"“I am so sick of my T-shirt getting wet whenever I pour a lot of liquid on it!”

“I wish my iPhone 4 or 5 would not get so damaged every time I carefully place it at the bottom of a jug filled with water!”

“My new white shoes have been stained by the chocolate sauce and mustard I squeezed on them earlier! What gives?!”

“This cardboard box I chose to hold all of the water is just not doing a great job of it! ”

These are all things you’re used to saying, but you will be saying them no longer! After a two year wait, Rust-Oleum’s NeverWet – an invention of Ross Nanotechnology (great business name, Ross) – has just hit shelves in the States.

It is “a family of super hydrophobic coating that completely repels water and heavy oils,” and you can buy it online here for $20 a can."

&
"Couple questions left unanswered:

A) What does it taste like?

B) What does it feel like?

C) How much cancer will it give me, and how quickly?

D) What happens if you get it on your hands and then you want to wash it off your hands? Will you be NeverWet forever?

5) If you spray the inside walls of a glass tumbler with NeverWet but not the inside base of that tumbler, and then you fill up the tumbler with water or with another liquid of your choice, like mustard, will it form a mustard tower inside the tumbler? Can you take a photo of the mustard tower and send it to us very soon?"

Recycled mix (using old asphalt with other "stuff" that can be put into mix to get rid of it..like rubber tires) doesn't lay as well as new asphalt mix or hold up as well.

Since old mix uses old asphalt, it typically has oil, gasoline, diesel, etc soaked into it. All of these substances degrade/eat asphalt over time. It's why they don't use asphalt around fuel pumps, because all of the constant and pure spillage would eat holes in it. Turns the asphalt gummy...goes right into it and sometimes thru to the sub-grade rock and then soil. Also motorcycle kick stands don't do well on asphalt, contaminated or not..especially on hot days. Asphalt will become pliable on really hot days and a focused direct pressure like a motorcycle kickstand can punch a hole into it that be deep enough to let the bike tip over. Use a wood block or piece of plywood to fix this and spread the pressure.

I used to work in the asphalt business, mostly rolling it. My dad worked in it more substantially than myself working on airport jobs, highways, etc. Many of those jobs won't allow old asphalt to be used in their mix. And they are big enough to force plants to switch over from remixed (old and new) to all new mixes. You'll notice that jobs done with the new mixes hold up much longer, look better, lay better, hold their heat better during the laying process, and come out much smoother looking and less "dirty looking" upon finish. I am guessing at this, but I believe it to be because the asphalt has more tar and less other chemicals and the tar is able to absorb any dirt you might pick up when you move to existing surfaces onto the new asphalt. Where the remix (containing old) has gasoline, etc breaking down the tar and less fresh tar to begin with, so that little bit of dirt you pick up transfers to the remix asphalt like a magnet.

Highways probably won't have as much surface area covered in long term spillage as stop and go traffic where it will be focused at the lights, stop signs, along edge of the streets where people park. But the highway will have big sections of highly contaminated asphalt where semis flip, car wrecks occur, etc. So these same sections if they are remixing it on the go, will end up with a bunch of really bad asphalt on or just after it if they don't throw it out.

And to clarify a few things upon incase people are unfamiliar.

Asphalt plants are usually multi purpose. They are usually a stone quarry with an asphalt plant situated somewhere on site. They filter and crush the stone into piles for sub grade work of various needs. And they draw from these piles to feed the asphalt plant. They do new mix and recycled mix (old mix) which I'll explain below. They also often times have sealer (the black coating you put on parking lots and driveways), I'll explain it below. Roofing tar, regular/asphalt tar, and crack filler..and I'll cover these below as well.

The plants have some human guesswork involved, they have to estimate tonnage and how much tar should be added. They screw up pretty often. It wasn't unheard of for us to get super tarry asphalt mixes where it was like goo coming out of the truck. Or no-tar mixes where it was just slightly black painted rocks. Or mixes where we called them "burnt" where they pumped in their cleaning mixture into the mix and it was breaking down the mixture to help get it out of the hoppers of the plant. These were usually people being trained who hit the wrong button without realizing it.

The plants have to clean the mixtures out of the hopper (where they dump it into the truck) to cycle over to a new mixture they keep in on-site silo looking things that stir and heat it. Which the silos also have to be cleaned at the end of the day or heated all night lest they hardened and stop up the whole thing. They usually stop heating all night as it gets closer to winter season because they don't do enough business to make it worthwhile.

Ok mixtures:

I didn't mention base mix anywhere...but it's why they typically have to switch over to different mixes, because places need base mix instead of finish layer....the layer you see when finished looks less rocky than base and is pliable.

Base mix = larger aggregate rocks, much more rocky. Doesn't have much fine rock in it. It's meant to be something you can quickly lay that will hold up the weight of heavy vehicles right away. Usually this is only used on fresh roadways where they are laying directly over rock sub-grades. It makes it easier to lay the finish layer smoothly, makes for a cleaner looking job by locking the rock and it's dust in...and is cheaper than using all finish. You can almost go from laying base mix to laying finish layer right on top of it with no delay. You can't do this with two layers of finish, because it's too pliable and it has to cool down for the heavy vehicles to drive over it without squishing it out and messing up the layer you just laid.

New mix asphalt = Tar mixture with aggregate like fine almost sand like rocks along with larger rocks to give it stability larger rocks are maybe the size of your pinkie nail at the largest. Tar is mixed throughout, the whole mix is constantly stirred and heated inside the plant, drawn into the hopper and dumped in a truck that pulls underneath. I am told that this mix used to be even better in the past, but now air regulations require them to "inject" their dust from rock crushing into the mixes so again this can cause the mix to be less tarry due to the dust being absorbed and they can completely ruin it by injecting too much.

SCAM ALERT: Look below remix as it pertains to both.

Remix (old and new) asphalt = Very similar to new mix, except they grind up old asphalt that they have sitting on-site in the stone quarry congealing into a big pile depending on it's contamination. This will depend on percentage they are legally required/allowed to put into these mixes. Less of the remix in the mixture, the better it is....less contaminates. Sometimes they even put rubber tires and other rubber products into the mixture. Although they don't do that much here. SOMETIMES it is desirable to have rubber in the mixture like running tracks, where they are springy. This is a special mixture, and it's a massive PITA to lay because it's really gummy and sticks to everything along the process.

SCAM ALERT: They typically do this to older people. But someone will stop and tell you they are working on a big site close, and they are going to have some extra material at the end. Usually you would dump this at the plant or somewhere you have set aside. They want to help you get a new looking driveway. They will lay the asphalt less than an inch thick. It will look really good when they finish. A year later it will be broken apart in most cases. Because they didn't tar, and they laid it too thin. You can lay asphalt thinner if you tar really well....but you want to lay it at least a inch and a half per layer or so. Sometimes you have to lay it thin near man holes and drains to not block water. So don't go crazy on somebody because of this if you see them doing it in certain places. Generally they try to average an inch and a half across a job per layer on finish. Thicker on base mixes since it has larger rocks in it and it has to be at least as thick as the biggest rock in it.

Sealer (the black coating you put on parking lots and driveways) - This is almost like a black paint in some circumstances. Some of it has chemicals, I think creosote, which react to the sunlight and cure it to seal it to the asphalt. Depending on what you buy, you may have to mix water into it to make it suitable for the task. Some come pre-mixed and you just have to stir. Usually you put two coatings on new asphalt, one coat if it's been sealed before. Sealer WILL NOT make your driveway last longer by any noticeable degree. It will make it look dark, and repel chemical spills to some degree. However chemicals will still penetrate as you can't clean up everything that drops. ALSO, sealer makes your driveway much slicker. This is why they don't use sealer on roadways, if they are using some kind of treatment it's something else because sealer fills in all of the fine holes in asphalt and makes it more slippery because of this..especially in the rain. Sealer has to cure for a couple days, you can't drive on it and it can't get wet. So listen to them when they say they don't want to seal it due to weather. Don't let them seal it in the spring or fall. Do it in the summer so it's nice and hot and not much moisture. Sealer looks more brown going down than black. But it cures to black.....it almost looks like chocolate cake mix. Dunno if they taste the same.

If you are sealing your own driveway, do not get it on you. It burns like a mother, I've gotten it on myself and if you don't clean it off right away it will burn you like a really bad sunburn after being exposed to sunlight for awhile. Some people are not bothered by creosote (if this is the correct chemical in sealer)...but better to not find out..because it hurts if you are.

SCAM ALERT: People will seal your driveways with motor oil or even too watered down sealer. They look very similar going down. There is no easy way to tell the difference besides knowing what they smell like. The first rain will turn your motor oil covered driveway into a mess. We have gypsies in the area pretend to be local businesses and pull things like this, it's bad. They disappear at the end of summer and the businesses are left with people pissed off.

Roofing tar - Runnier and less thick than regular tar. It's meant to be pumped onto roofs and run down to fill in holes and places water can get in. If you use this on your driveway, you're pretty much going to end up with a huge mess for years. Because it will continually heat up in the sun and liquify again being tracked into your house over and over and over.

Regular/asphalt tar - Use this, like in the video, along curb sides and between old and new layers to help seal out water and keep the layers sticking together as you put down the new layer. You wouldn't need to tar between a base and finish layer if they were laid a day or two apart because the base layer would heat up again from the finish layer and stick. However if the base layer is older..like a couple weeks or a month. You would probably tar between them. Anything else..you tar between...concrete, old asphalt. The only exception would be sub-grade rock, however sometimes you even tar this, especially if it's in a grade critical location...where you can't have the asphalt humping up even a little. But on a typical driveway, the rock layer has enough jags and spaces that a layer of asphalt will cling to it just fine.

Crack filler - You would use this before sealing your driveway, not after. You can also use it alone to fill in gaps in your driveway and try to seal out water. So it doesn't get into the crack, freeze and blow your driveway up. The best crack filler is rubberized, so it will expand and contract. Plus it also isn't as prone to liquify again in the heat and stick to your car tires and shoes. It has to be heated up substantially to liquify, but I've seen non-rubberized begin to liquify in direct sunlight on a 95+F degree day. I try not to step on the cracks on the really hot days, as I'd rather not find out if it's going to stick to my shoes.

...from the source material in question;

Matthew 5:38-40
New International Version (NIV)
Eye for Eye

“You have heard that it was said, ‘Eye for eye, and tooth for tooth.’ But I tell you, do not resist an evil person. If anyone slaps you on the right cheek, turn to them the other cheek also. And if anyone wants to sue you and take your shirt, hand over your coat as well.

...and...

Matthew 22:36-40
New International Version (NIV)

“Teacher, which is the greatest commandment in the Law?” Jesus replied: “‘Love the Lord your God with all your heart and with all your soul and with all your mind.’ This is the first and greatest commandment. And the second is like it: ‘Love your neighbor as yourself.’ All the Law and the Prophets hang on these two commandments.”


...so, it may be cherry picking, but those are the cherries they were specifically directed to pick.