Fairbs US

Member Profile


Member Since: June 5, 2012
Last Power Points used: never
Available: now
Power Points at Recharge: 1   Get More Power Points Now!

Comments to Fairbs

bremnet says...

Howdy - sorry for the delay, was traveling on business. The issue you are referring to below with regards to reusable water bottles is I believe related to the type of liner (thin coating of polymer based material that is coated on the inside of some but not all of these bottles). In most cases when polymers come in contact with food (incl. water) the concerns are usually not in the polymer itself, but in some of the additives (processing aids, plasticizers, anti-oxidants, UV stabilizers, pigments etc) that in some cases have negative impacts on some human metabolic processes. I would emphasize 'some'. The recent outrage over BPA is not supported unequivocally by scientific evidence, but there is enough uncertainty to move away from it as a plasticizer in PET bottles. If one was to use a food grade polyethylene or polypropylene water bottle, requiring no liner, and totally suitable as a water bottle, then there is no concern at all with the long term use of this material in water bottles. Next time you go through the grocery store, have a look at all the packaging - films on processed meets, stretch wrap on fresh meat cuts, all of your cold dairy products - the vast majority of these are made from one of either polyethylene or polypropylene, with a smattering of polystyrene and polyvinylidene chloride thrown in. All perfectly safe.

As for how the balls are made - these are blow molded. If you have a look at the plastic baseballs made for kids that come with a big fat plastic bat (or really any hard plastic ball that you might find at Wal Mart or Toys'R'Us, you'll see the small ridge that runs equatorially around the circumference of the ball (that's the parting line where the two mold halves come together) and somewhere on that line there will be either a little tiny hole or a small protruding knob that used to be the parison where the air was injected into the small plastic glob forcing it to the walls of the mold like an expanding balloon. This is the same type of molding that makes your liquid dishwashing detergent bottle, plastic ketchup and mustard containers, and plastic milk jugs. Hope this helps a bit. cheers

Fairbs said:

I admit this is something I know little about so I have a couple of questions if you don't mind... There seems to be a concern about what reusable water bottles are made of. So you're supposed to use a certain type or the plastic (and this may be the wrong term) leeches into your water and then I don't know exactly what, but you probably die some horrible death maybe like in the toxic avenger. So one question is... Is that true (or maybe a less exaggerated version)? The second one I think you may have answered is... Are these injection molded? I can't comprehend how these would be made. I think I need a How it's Made to wrap my mind around this. Thanks.

siftbot says...

Happy anniversary! Today marks year number 3 since you first became a Sifter and the community is better for having you. Thanks for your contributions!


poolcleaner says...

Kids in the Hall is my favorite sketch comedy group of all time. Monty Python a close second. I just think those Canadians are cuter crossdressers.

oritteropo says...

Actually, since the development of adaptive optics, ground based telescopes aren't obsolete at all. Even without adaptive optics they have their uses, and some interesting science is done with them.

Getting telescope time on a space based telescope (or large ground based telescope for that matter) is quite hard, which limits the things astronomers can do with them.

Fairbs said:

That makes sense since space is a vacuum that they would test it in a vacuum. For some reason, I was thinking it was a land based telescope. I guess those are pretty much obsolete at this point.

Thanks!

bareboards2 says...

I hear you.

My dad was a rural Oklahoma farm boy depression era baby. Ten cents an hour he was paid.

He would leave a dollar tip. ONE DOLLAR.

I would do the same thing -- go back and leave more.

He finally got it, and started tipping better. But it took a long time.

Fairbs said:

Amen on your wal-mart comment. Corporate welfare at its finest.

My parents are pretty bad tippers and I used to add a little to the pot on the sly because I felt bad for the waitstaff.

bareboards2 says...

He's legitimately uncomfortable.

He looks like a trapped animal to me, angry at being cornered.

Management never will do that -- I'm betting in part because he actually gets more attention with this than he would if he talked.

It is all so messed up.

And yeah -- it gets back to the media, doesn't it? They know who he is. He has been clear he won't talk. And yet here they come.

Pisses me off.

Fairbs said:

You've got a point, it's better than a bunch of sports cliches. I take it this guy's good so the media wants to talk to him. Seems like management might want to have a talk with the media and ask they leave him alone. I guess my beef is that a lot of football players act like primadonnas and he comes off that way. I can understand if he legitimately is uncomfortable or not good at answering questions. In that case, I would say the media should back off.

Fairbs says...

No love for the Bruins? I'm appalled.

I somewhat support the Pats because my dad liked them because Brady is the QB and he went to Michigan and the Lions sucked for so long (yes weird logic). I don't care much for the Sox (or baseball in general) except for when they beat the Yankees.

enoch said:

you would be correct my friend,but i am cheating a bit.i grew up in rhode island and burr is from boston.

same diff.we all root for the sox and patriots!

enoch says...

you would be correct my friend,but i am cheating a bit.i grew up in rhode island and burr is from boston.

same diff.we all root for the sox and patriots!

Fairbs said:

He's one of my favorites. I'd put Louis C.K. very slightly above. Gaffigan and Reagan are pretty high up there. I'm sure there are others too that I can't think of right now.

What's the home town? I'm guessing somewhere in the NE?

bareboards2 says...

I do wish there was a short, non-insulting phrase that covers this complex situation.

Unfortunately, in our sound bite world, and with my short fuse, I regrettably fall back on the short insult.

It also kinda works, which is unfortunate. Conflict draws eyes, ideas can be exchanged, the education can happen.

I can get educated, too -- sometimes people don't know that I have shifted my position, because I do it so quickly when a good point is made. And sometimes, I dig my heels in and don't listen. Which is an education in itself, when I reflect later.

It's all good.

I do appreciate your calm manner. Thank you.

Fairbs said:

The term is insulting, but I think it should be. I would say it draws attention to a behavior that could just be innocent or non-intentional or it could be that the person is a real condescending a-hat that needs to be called out and deserves ridicule.

The term popped up on my radar not that long ago. It's interesting understanding the nuances better so thanks!

siftbot says...

Happy anniversary! Today marks year number 2 since you first became a Sifter and the community is better for having you. Thanks for your contributions!


Send this Article to a Friend



Separate multiple emails with a comma (,); limit 5 recipients






Your email has been sent successfully!

Manage this Video in Your Playlists

Member's Highest Rated Videos