I was doing an artsy fartsy series like this with hydrofluoric acid but we ran into some problem I remember and barely even got through the first model.

Flesh-Eating Hydrofluoric Acid - Periodic Table of Videos has been added as a related post - related requested by eric3579.

4:47 It's Hydrofluoric acid not hydrochloric. get the chemistry right!

>> ^Deano:

When you say "flush" what does that mean? Dab with a wet towel or spray water in large quantities at the face?
I think I would be useful in this situation given as you state that water isn't always the most appropriate first treatment.
>> ^NordlichReiter:
Man, this seems to happen more and more. Do I need to learn how to deal with this as a potential first responder?
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946
Have someone call 911 and you call National Poison Control Hotline (1-800-222-1222) for assistance identifying the type of chemical you are dealing with.
If acid is in the eyes rinse with low pressure water, large amounts of water. If there is acid on the eyes, it's to late to worry about what will happen when the water contacts the chemical at least that is my take on the whole affair. Remember I'm not a lawyer or a professional emergency medical responder but at any given moment anyone can become a first responder. The best thing you can do is keep the victim under as much control as possible so as not to cause anymore damage.

Chemical burns not rinsed with water
Some chemical burns are made worse if rinsed (flushed) with water.
Carbolic acid or phenol does not mix with water, so use isopropyl (rubbing) alcohol first to flush the chemical off the skin and then flush with water. If alcohol is not available, flush with a large amount of water. Do not flush the eye with alcohol.
Sulfuric acid is flushed with a mild, soapy solution if the burns are not severe. Sulfuric acid feels hot when water is added to the acid, but it is better to flush the area and not leave the acid on the skin.
Hydrofluoric acid is flushed with a bicarbonate of soda (baking soda) solution. (Use a small amount of water to make solution.) Then flush with a large amount of water. Burns from this acid may not show at first, so flush the area even if a burn is not seen. Do not flush the eye itself with a baking soda solution.
Dry powders, such as dry lime, are brushed away first, because adding water can make a liquid that burns. After the powder is brushed away, flush with water for 20 minutes.
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946

When they say flush they mean to run water over the affected area. Like washing your hands. Spraying large amounts of water may not be the best choice.

Anything in the eyes should be low pressure. Usually the eye washing stations are just upturned shower heads. Also, you have to hold your eye(s) open which is really hard to do.

>> ^NordlichReiter:

Man, this seems to happen more and more. Do I need to learn how to deal with this as a potential first responder?
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946
Have someone call 911 and you call National Poison Control Hotline (1-800-222-1222) for assistance identifying the type of chemical you are dealing with.
If acid is in the eyes rinse with low pressure water, large amounts of water. If there is acid on the eyes, it's to late to worry about what will happen when the water contacts the chemical at least that is my take on the whole affair. Remember I'm not a lawyer or a professional emergency medical responder but at any given moment anyone can become a first responder. The best thing you can do is keep the victim under as much control as possible so as not to cause anymore damage.

Chemical burns not rinsed with water
Some chemical burns are made worse if rinsed (flushed) with water.
Carbolic acid or phenol does not mix with water, so use isopropyl (rubbing) alcohol first to flush the chemical off the skin and then flush with water. If alcohol is not available, flush with a large amount of water. Do not flush the eye with alcohol.
Sulfuric acid is flushed with a mild, soapy solution if the burns are not severe. Sulfuric acid feels hot when water is added to the acid, but it is better to flush the area and not leave the acid on the skin.
Hydrofluoric acid is flushed with a bicarbonate of soda (baking soda) solution. (Use a small amount of water to make solution.) Then flush with a large amount of water. Burns from this acid may not show at first, so flush the area even if a burn is not seen. Do not flush the eye itself with a baking soda solution.
Dry powders, such as dry lime, are brushed away first, because adding water can make a liquid that burns. After the powder is brushed away, flush with water for 20 minutes.
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946

Now I have to learn all of this shit to keep people from harming themselves.

Hmm, some people just need to forget about god and get laid.

When you say "flush" what does that mean? Dab with a wet towel or spray water in large quantities at the face?
I think I would be useful in this situation given as you state that water isn't always the most appropriate first treatment.

>> ^NordlichReiter:

Man, this seems to happen more and more. Do I need to learn how to deal with this as a potential first responder?
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946
Have someone call 911 and you call National Poison Control Hotline (1-800-222-1222) for assistance identifying the type of chemical you are dealing with.
If acid is in the eyes rinse with low pressure water, large amounts of water. If there is acid on the eyes, it's to late to worry about what will happen when the water contacts the chemical at least that is my take on the whole affair. Remember I'm not a lawyer or a professional emergency medical responder but at any given moment anyone can become a first responder. The best thing you can do is keep the victim under as much control as possible so as not to cause anymore damage.

Chemical burns not rinsed with water
Some chemical burns are made worse if rinsed (flushed) with water.
Carbolic acid or phenol does not mix with water, so use isopropyl (rubbing) alcohol first to flush the chemical off the skin and then flush with water. If alcohol is not available, flush with a large amount of water. Do not flush the eye with alcohol.
Sulfuric acid is flushed with a mild, soapy solution if the burns are not severe. Sulfuric acid feels hot when water is added to the acid, but it is better to flush the area and not leave the acid on the skin.
Hydrofluoric acid is flushed with a bicarbonate of soda (baking soda) solution. (Use a small amount of water to make solution.) Then flush with a large amount of water. Burns from this acid may not show at first, so flush the area even if a burn is not seen. Do not flush the eye itself with a baking soda solution.
Dry powders, such as dry lime, are brushed away first, because adding water can make a liquid that burns. After the powder is brushed away, flush with water for 20 minutes.
http://www.revolutionhealth.com/articles/first-aid-for-chemical
-burns/sig256946

Man, this seems to happen more and more. Do I need to learn how to deal with this as a potential first responder?

http://www.revolutionhealth.com/articles/first-aid-for-chemical-burns/sig256946

Have someone call 911 and you call National Poison Control Hotline (1-800-222-1222) for assistance identifying the type of chemical you are dealing with.

If acid is in the eyes rinse with low pressure water, large amounts of water. If there is acid on the eyes, it's to late to worry about what will happen when the water contacts the chemical at least that is my take on the whole affair. Remember I'm not a lawyer or a professional emergency medical responder but at any given moment anyone can become a first responder. The best thing you can do is keep the victim under as much control as possible so as not to cause anymore damage.

Chemical burns not rinsed with water

Some chemical burns are made worse if rinsed (flushed) with water.

* Carbolic acid or phenol does not mix with water, so use isopropyl (rubbing) alcohol first to flush the chemical off the skin and then flush with water. If alcohol is not available, flush with a large amount of water. Do not flush the eye with alcohol.
* Sulfuric acid is flushed with a mild, soapy solution if the burns are not severe. Sulfuric acid feels hot when water is added to the acid, but it is better to flush the area and not leave the acid on the skin.
* Hydrofluoric acid is flushed with a bicarbonate of soda (baking soda) solution. (Use a small amount of water to make solution.) Then flush with a large amount of water. Burns from this acid may not show at first, so flush the area even if a burn is not seen. Do not flush the eye itself with a baking soda solution.
* Dry powders, such as dry lime, are brushed away first, because adding water can make a liquid that burns. After the powder is brushed away, flush with water for 20 minutes.

http://www.revolutionhealth.com/articles/first-aid-for-chemical-burns/sig256946

Halon 1301 is what is used in most mass suppression systems and only produces toxic biproducts (hydrobromic acid and hydrofluoric acid) after exposure to flame. Or so wiki says.

If, choggy, by fluoride you mean the reduced form of fluorin then large amounts would kill the crap out of you as it is one of the most reactive elements. For this reason there are so many different fluoride containing compounds in so many diverse forms that you cant really ask staight up if larges amounts of fluoride is bad for you. some fluoride compounds would do anything, some will keep grease from sticking to your frying pan and some will burn holes in your skin before you can say hydrofluoric acid.